Home > Products > Precautions for use of INA bearings

Precautions for use of INA bearings

wallpapers Products 2021-03-01

Everyone knows that INA bearings are precision parts, and they need to be very cautious when using them, that is, they use high-performance INA bearings. If they are used improperly, they will not achieve the expected performance results, and it is easy to damage the INA bearings. Most of the INA bearings are damaged due to many reasons-exceeding the originally estimated load, ineffective sealing, excessively small INA bearing clearance caused by over-tight fit, etc. Any one of these factors has its special damage type and will leave special damage marks.

Therefore, looking at the damaged bearings, in most cases, the possible causes can be found. In general, one-third of the INA bearing damage is due to fatigue damage, and the other one-third is due to poor lubrication. The other one-third is caused by contaminants entering the INA bearings or improper installation.

First, keep the INA bearing and its surrounding environment clean

The second point is to install carefully and carefully when using the installation

Third, use appropriate and accurate installation tools

Use special tools as much as possible, and try to avoid using things like cloth and short fibers.

Fourth point, to prevent corrosion of INA bearings, do not use water bubbles

The INA bearing is made of stainless steel, but it is also afraid of water. If you don’t believe it, you should soak it in the water. Oh, when you take the INA bearing by hand, you must fully wash off the sweat on your hands and apply high-quality mineral oil. Perform operations, especially in the rainy season and summer, pay special attention to rust prevention, don't tell me what rust is afraid of, okay, try it yourself, and see what the rust will be!


Say something
  • All comments(0)
    No comment yet. Please say something!
Tag: bearings   INA bearings   INA