News

  • 0
  • 0

Global Inconel718 powder market trend 2022-2027 Properties and Production Technology of Nickel-based Superalloys by Newsdodo-trail

How serious are fertility problems today? People don't want to give birth,can't afford it, and can't give birth that has become the "three mountains".
The problem of childbirth is related to the people's livelihood. Whether a country can prosper or not depends on the population. I saw a set of data a few days ago. The data shows that on January 1, 1990, 2,784 babies were born in Shanghai. Ten years later, on January 1, 2000, 1,148 babies were born in Shanghai. In 2010, the number became 380. , 2020 only 156 people, the decline in the birth rate is shocking. The three most critical reasons are: I don't want to give birth, I can't afford it, I can't give birth! The decline of the global population will bring a series of economic and social problems, among which the demand for Inconel718 powder will also be affected.

Nickel-based superalloys are the most widely used. The main reason is that, one is that more alloying elements can be dissolved in the nickel-based alloy, and it can maintain good structural stability; the other is that it can form a coherent and ordered A3B-type intermetallic compound γ[Ni3(Al, Ti)] As a strengthening phase, the alloy can be effectively strengthened and obtain higher high temperature strength than iron-based superalloys and cobalt-based superalloys; thirdly, nickel-based alloys containing chromium have better oxidation and resistance than iron-based superalloys. 

1114 (1).jpg

Nickel-based alloys contain more than ten elements, of which Cr mainly plays an anti-oxidation and anti-corrosion role, and other elements mainly play a strengthening role. According to their strengthening action mode, they can be divided into: solid solution strengthening elements such as tungsten, molybdenum, cobalt, chromium and vanadium; precipitation strengthening elements such as aluminum, titanium, niobium and tantalum; grain boundary strengthening elements such as boron, zirconium, Magnesium and rare earth elements, etc.


Production Process

In terms of smelting: in order to obtain more pure molten steel, reduce gas content and harmful element content; at the same time, due to the presence of easily oxidizable elements such as Al and Ti in some alloys, it is difficult to control non-vacuum smelting; it is also to obtain better thermoplasticity , Nickel-based heat-resistant alloys are usually smelted in a vacuum induction furnace, and even produced by vacuum induction smelting plus vacuum consumable furnace or electroslag furnace remelting.


In terms of deformation: forging and rolling processes are used. For alloys with poor thermoplasticity, they are even rolled after extrusion and billeting or are directly extruded with mild steel (or stainless steel) sheathing. The purpose of deformation is to break the casting structure and optimize the microstructure.


Casting: usually use a vacuum induction furnace to smelt the master alloy to ensure the composition and control the gas and impurity content, and use the vacuum remelting-precision casting method to make parts.


Heat treatment: Wrought alloy and some cast alloys need to be heat treated, including solution treatment, intermediate treatment and aging treatment. Take Udmet 500 alloy as an example. Its heat treatment system is divided into four stages: solution treatment, 1175℃, 2 hours, Air cooling; intermediate treatment, 1080°C, 4 hours, air cooling; primary aging treatment, 843°C, 24 hours, air cooling; secondary aging treatment, 760°C, 16 hours, air cooling. In order to obtain the required organizational state and good overall performance.


About KMPASS

KMPASS is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc. As a leading nanotechnology development manufacturer, KMPASS dominates the market. Our professional work team provides perfect solutions to help improve the efficiency of various industries, create value, and easily cope with various challenges. If you are looking for Inconel718 powder, please send an email to: sales2@nanotrun.com


Prior to the impact of COVID-19 on the chemicals and materials industry and the price of the Inconel718 powder, many industry observers expected low to flat growth in 2021 in all regions outside Asia, with many countries seeing slower growth compared to recent years. Operational excellence has long been a hallmark of the Inconel718 powder chemical industry, and many companies are financially able to withstand short-term dips in end-market demand due to rapid leverage from reduced capex on hand.

The analysis shows that, whatever the final course of the pandemic, we can expect the inevitable long-term effects. Workplaces are expected to slowly return to pre-COVID-19 practices. Companies investing in enterprise-wide digital initiatives saw these "payoffs" in the early pandemic environment. For more information about Inconel718 powder, please feel free to contact us.

Inquery us

Our Latest News

Global graphene powder market trend 2022-2027 Is graphene hydrophilic or hydrophobic? by Newsdodo-trail

 As many researchers believe, graphene floating on the water does not repel water, but attracts it. Graphene is made of the same material as graphite-for example, found in pencils-which is why graphene has long been thought to be as waterproof as gra…

Global silicon nitride market trend 2025-2029 What are the advantages of silicon nitride? by Newsdodo-trail

The African Development Bank will finance $25 billion by 2025 to support Africa's fight against climate change, the bank's president said at the bank's annual meeting in Accra, Ghana. He noted that climate change has had many negative impacts on the…